Flopro Classic Hose Reel 20 Metres

Flopro Classic Hose Reel 20 Metres

  • £44.99
    Unit price per 
  • Save £25
Tax included.

Will be in stock after

20m portable hose reel with connectors and nozzle inside the reel ready to assemble. Choose how you want to use your reel; you can wall mount or leave freestanding. The connectors allow a snap fit to all watering brands.

A multi-purpose hose for general watering. With 3 layers it provides the quality & flexibility needed for all watering tasks.

This hose set includes:

  • 20m Hose
  • Dual Fit Outside Tap Connector (1/2" & 3/4")
  • Hose Connector
  • Water Stop Hose Connector
  • Watering Nozzle
  • Wall bracket with screws and plugs

Reel features

  • Wall mounted or freestanding
  • Large capacity - holds up to 45m of 12.5mm hosepipe
  • Designed to ensure the hose does not twist or kink when winding
  • 2 year guarantee

Hose features

  • Flexible
  • UV resistant
  • Pressure: up to 20 bar
  • Temperature range: -5/+45 C

Hose specification

Hose Length: 20m
Diameter of Connectors and Nozzle: 12.5mm / 1/2”
Diameter of Tap Adapter: 19mm (3/4") with 12.5mm (1/2") insert


Instructions for use

1. Remove the entire hose from the reel and remove all fittings from inside the drum

2. To attach hosepipe to the reel, unscrew the inlet cap and place over the hosepipe. The push the spring that is attached to the inlet into the hosepipe as far as it will go. Push the hosepipe into the inlet firmly, then re-tighten the cap onto the inlet. Ensure this connection is as tight as possible.

3. Cut length of hosepipe to create a leader hose to connect the reel to your tap approx 1.5m and attach a hose connector to each end of the hosepipe (or a Flopro Hose Connection Set is available to purchase separately meaning you do not need to cut off any hosepipe)

4. Attach the tap connector to the tap and connect the leader hose from your tap to the reel

5. Add a water stop connector (connector with pin to ensure automatic cut off with water if you disconnect the nozzle) and nozzle to the end of the main hose pipe

6. Run water through the hosepipe to ensure all connections are secure and then wind the main length of hose back onto the hose reel